Gemstone Lights Cost: The Manufacturer Publishes No Price
Gemstone Lights does not publish a price. Its own FAQ page answering “How much do Gemstone Lights cost?” gives no dollar figure at all, stating only that cost is determined by the number of linear feet needed and the local market rate for installation, and directing you to an authorized dealer. Where dealers publish their own rates, installed pricing sits around $20 to $26 per linear foot; one authorized dealer covering Utah and Nevada lists $22.50 per linear foot installed.
- Manufacturer's published price
- None
- Published dealer rates
- ~$20–$26 / ft installed
- Named dealer example
- $22.50 / ft (UT & NV)
- What sets the price, per Gemstone
- Linear feet × local market rate
What Gemstone actually says
The company keeps a FAQ entry titled with the exact question buyers type into a search box, and the answer contains no number. It says the cost is determined by two factors, the number of linear feet needed and the local market rate for installation, and asks you to contact your local authorized dealer for a personalized price.
That is worth stating plainly rather than filling the gap with an invented average, because the absence is the answer to the question most people are asking. If you came here to budget from the manufacturer's own published figure, there is not one to budget from. Every national dollar amount you find attributed to Gemstone comes from a dealer, an aggregator, or an article estimating on your behalf.
Why a manufacturer withholds the number
It is a defensible way to sell a dealer-installed product, not evidence of anything sinister. Installed rates genuinely vary by market, roof access and labor cost, and a manufacturer publishing one national figure invites every dealer above it to argue with their own factory. JellyFish and Trimlight publish ranges wide enough to absorb that; Gemstone chose not to publish at all.
The practical consequence lands on you. With Trimlight or JellyFish you can sanity-check a quote against the manufacturer's own range before you take a call. With Gemstone your only reference points are other dealers, so the second quote is not optional. Get at least two Gemstone dealers on your actual footage, and one quote from a different system entirely, before you have any idea whether a number is fair.
The dealer rates that are public
Some authorized dealers publish their own installed pricing, and those figures cluster around $20 to $26 per linear foot. NGLS Corp, an authorized Gemstone dealer covering Utah and Nevada, publishes $22.50 per linear foot installed, which is the most specific public Gemstone figure we could verify.
Treat that as a reference point from one market, not a national price. Utah is close to the center of gravity of this whole industry and is a competitive install market; a dealer rate there is not a forecast for the Northeast, where labor and access costs run higher. Use it the way you would use a comparable sale: evidence that a quote is in a reasonable neighborhood, not proof that yours should match it.
How to budget without a published number
Start from footage, because that is the variable Gemstone itself names first. Measure or have someone measure the elevations you actually want lit, and decide before any sales call whether that is the front only or the whole house. Then price the same footage against the brands that do publish, which puts a floor and a ceiling around what you should expect: roughly $18 to $35 per foot installed across the category.
When the Gemstone quote arrives, make it show footage and rate as separate numbers, and ask the two questions the brand page does not answer: what the parts and labor warranties are in years, each stated separately, and who performs a service call in year four. Gemstone does not publish warranty terms next to price either, so that answer has to come from your dealer in writing.
Common questions
How much do Gemstone Lights cost?
Gemstone does not publish a price. Its official FAQ says only that cost is set by the number of linear feet and the local market rate, and sends you to an authorized dealer. Dealer rates that are published sit around $20 to $26 per linear foot installed, with one authorized Utah and Nevada dealer listing $22.50 per foot. Those are dealer figures, not a manufacturer price.
Why can't I find a price for Gemstone Lights anywhere?
Because the manufacturer chose not to publish one, and every national figure you find is somebody else's estimate. It is a normal way to sell a dealer-installed product where labor and access costs vary by market. The practical effect is that you cannot sanity-check a Gemstone quote against the factory the way you can with Trimlight or JellyFish, so getting a second dealer quote matters more here than with other brands.
Is Gemstone more expensive than Trimlight or JellyFish?
Published dealer rates around $20 to $26 per foot put Gemstone in the middle of the category, above Trimlight's $18 starting point and below JellyFish's $35 ceiling. Since Gemstone publishes nothing itself, that comparison rests on dealer figures from particular markets rather than on national pricing, so it should not carry much weight against three real quotes on your own roofline.
What warranty do Gemstone Lights come with?
Gemstone does not publish warranty terms alongside its pricing FAQ, so we are not going to state a number for it here. Ask your dealer for parts and labor as two separate figures in years, in writing on the quote, and ask specifically whether coverage transfers if you sell the house. Those three answers are more useful than any warranty comparison chart, including ours.
Sources
Every figure above is attributed. These are the pages the numbers came from, checked on the dates shown.
- Gemstone Lights, “How Much do Gemstone Lights Cost?” (official FAQ)
- NGLS Corp, authorized Gemstone dealer for Utah and Nevada (published rate)
- Trimlight, “How Much Does Trimlight Cost? Full Pricing Guide for 2026”
- JellyFish Lighting, “How much do permanent Christmas lights cost?” (updated September 4, 2026)